Construction fasteners are available in many sizes and are also a bit more flexible in their uses than anchor bolts are; since anchor bolts have to be installed in cement for proper use.

This means that even everyday people who construct furniture or are building something are probably using a construction fastener to complete the job.

Construction fasteners are also very easy to install and use. The design of a construction fastener is simplistic in nature and most average people have the ability to install a fastener, especially the smaller cousins of the bigger and more commercial grade fasteners.

For more information about anchor bolts or construction fasteners please visit the Anchor Bolt Source website.

When being custom created, both of these types of fasteners have to meet certain standards and pass safety testing’s before they are allowed to be released and become used in any real-life construction.  Anchor bolts also undergo the same process. The construction fasteners are tested for their strength, endurance, and a few other things that hold extreme importantance to the life-span of a construction fastener.

Of course, this is assuming that the design of the construction fastener has never been created before.  In the case that the customization only pertains to size, then this can easily be created in the factory with no testing needed.

Creating custom sizing for construction fasteners is rather simple and can be done quite efficiently.  Manufacturer’s have no problem meeting requests to create a custom fastener for you as long as you provide them reasonable time to fill your entire order. You can discuss this with any construction fastener manufacturer.

For more information on anchor bolts or construction fasteners please visit the Anchor Bolt Source website.

The difference between the black and the galvanized is that “black” construction fasteners (also called plain) are uncoated fasteners that haven’t been dipped in any type of coating material. These fasteners are for projects in which galvanization is not needed.

Galvanization refers to a construction fastener that has been dipped in a liquid zinc formula that coats the entire fastener. The zinc outer coating is meant to protect the construction fastener from corrosion. Corrosion happens when water or moisture is introduced to the construction fastener on a regular basis. The zinc outer coating will act as a repellent and becomes a first line of defense against moisture.

Each type of coating is equally needed in their own way.  It entirely depends upon the type of project you are undergoing.  There are several types of applications used for either type of coating, and as a contractor or builder you should be familiar with which type of coating you are going to need.

For more information about anchor bolts or construction fasteners please visit the Anchor Bolt Source website.

Here’s a basic list to help you make the right choice:

Application - What will the construction fastener be used for?
Body Design - The shape of the bolt’s body is directly correlated to the application it is suited for.
Diameter - The bigger the bolt the stronger the hold.  This does not mean that you want the bolt bigger than necessary.  That would be a waste of materials and will ultimately prove to be a bigger burden than its purpose.
Thread Type - Different thread types are designed to create different holds. This is important if you are working on a project that has potential to strip a bolt.
Material - The material of the bolt will also help decide the strength of the bolt. Different materials are suited for different projects just like their body design.
Drive Type – Does your project require the ability to unscrew the construction fastener easily?  Or are you constructing something that needs to be a more permanent piece?  Depending on the drive type the bolt can sway either way.

It’s important to be wise with your decision.  If you’re unsure, try to get a professional to assist you before you make your purchase.

For more information about anchor bolts or construction fasteners please visit the Anchor Bolt Source website.

Both anchor bolts and construction fasteners have to meet government requirements and quality standards.  In the anchor bolt industry both A.B.s and C.F.s have to rigorous testing in order to ensure they are completely safe and up to regulation standards. This includes testing the shear values and tensile making sure that the anchor bolt or construction fastener doesn’t immediately break upon force and/or over time due to fatigue.

Construction fasteners ultimately determine the life and usefulness of several different objects including some but not limited to the following:
- Machines
- Factories
- Vehicles
- Residential Constructions

For more information about anchor bolts and construction fasteners please visit the Anchor Bolt Source website.

There is a difference between the construction fasteners you use in your home and the construction fasteners used on the commercial level.  The main difference found between the two is that construction fasteners are actually quite a bit heavier and sturdier in comparison to something you would use in your home.

Construction fasteners include items such as nuts, bolts, pins, screws, and hinges. Of these items can be combined in several ways to conform construction fasteners.

Construction fasteners are used everywhere and in almost every construction project, ranging from small buildings to tall skyscrapers.  Construction fasteners have a wide range of uses that include commercial, residential and industrial uses.

With new kinds of construction fasteners being created and produced each and every day, new uses for construction fasteners are constantly arising. These tools are highly effective in assisting contractors and builders to secure one surface to another.

Not only are construction fasteners available to contractors and builders through a manufacturing level, the smaller cousins of these fasteners are available to consumers in hardware stores and similar venues. The types found for average consumers are pre-made fasteners.  In addition, construction fasteners include the ability to be custom made for any application.

For more information on anchor bolts and construction fasteners please visit the Anchor Bolt Source website.

There are several styles of construction nuts. Below is a list of some of the commonly used nut styles. Unfortunately, to ALL of the nut styles available, we would have to write a book, but it’s still useful to educate yourself on the major ones being used today.

Each of the following nut styles can be used with a mated bolt screw in order to complete the set and become a construction fastener.

-Coupling Nut- These nuts look similar to elongated tubes and are constructed to fasten two bolt ends to each other.
-Cap Nut - These nuts are commonly used when end of the screw or bolt is not desired to be seen. They are often used for decorative finish work and can be spotted by their rounded head.
-Hex Nut- The hex nut is the most common of them all. In fact, you see it pretty much everywhere.
-Castle Nut - Named for their castle-like appearance these nuts are well suited to use with cotter pins.
-Lock Nut - A lock nut comes equipped with a nylon insert. The nylon insert protects the bolt from loosening by locking up the threads tightly. It is also sometimes referred to as the “aircraft nut”.
-Tee Nut - These are rather special nuts and are constructed for use with wood. They have teeth that recess into wood once screwed in place. This design creates a secure lock.

For more information on anchor bolts and construction fasteners please visit the Anchor Bolt Source website.

We may never come to a common agreement as to which is the correct reference to the term. In all fairness, this particular post will reflect that of a construction fastener. A separate post will then reflect that of an anchor bolt. This isn’t about right or wrong, it’s about knowledge.

Below are a few different bolt styles that we commonly see while working with construction fasteners.
- One-Way Head
- Flat Head
- Oval Head
- Holt Head
- Fillister

In any case, these types of bolts can be used with a variety of nuts to create the perfect construction fastener.

For more information on anchor bolts, or construction fasteners please visit the Anchor Bolt Source website.

Nut: A nut is a piece of metal that has a threaded hole used to fasten with a mating bolt. There are various types of nuts that are able to be used with several types of bolts to create a construction fastener.

Bolt: The bolt is a capped screw that is meant to function with a nut to fasten one surface to another. The threading on a bolt and the nut are what keep the construction fastener from coming undone, or unscrewing from the pressure.

Both pieces require each other and work together.  The combination is used in construction projects everyday.   Be it simple home projects, or large commercial projects, construction fasteners are quite common in all types of construction.  In fact, you probably have a construction fastener right in your own home!

For more information about anchor bolts, or construction fasteners, please visit the Anchor Bolt Source website.

An installation for an anchor bolt is a completely different type of application that that of the installation process for a construction fastener.  Each device is meant to serve individual purposes, and should be used in rather different circumstances from each other.

It’s important to know and understand the differences between the anchor bolt and the construction fastener.  You may be using them incorrectly, which could impair the quality of work you’re doing, as well as harm the safety of the construction.

You may be interested in learning more about construction fasteners and how to find out more about them. Perhaps you’re simply doing a project at home and need to know which construction fastener to use, and you’ve stumbled upon this website in your quest. Hopefully, we’ve been helpful to you.

For more information about anchor bolts and construction fasteners please continue to visit the Anchor Bolt Source website.