Archive for March, 2008
Anchor Bolt Source - Anchor Bolts
March 4, 2008 2:13 pm Anchor bolts are used to keep two surfaces together while providing support to both of them. This being the case, anchor bolts are used in
a lot of different structures to make sure that they remain stable and safe. There are many anchor bolts used throughout these different structures to provide extra support and to keep the structure up and stable in case one of the anchor bolts fail. This system is in place more for a fail-safe then for anything; anchor bolts are extremely resilient and can handle supporting most structures in its entirety.
The manufacturing of anchor bolts happens on a mass scale, which means that you can get as many anchor bolts as 
you need quickly and efficiently. In fact, the manufacturer most likely has the anchor bolts you need for a project and, if they don’t, they can usually produce them for you in a timely manner to get you started. Since anchor bolts are produced like this it is imperative that the manufacturer does some quality control on their products. Going through their anchor bolts to make sure that you don’t get any defective ones is part of their job and benefits you in that you can rely on the product you are receiving.
Deciding who to use for your anchor bolt manufacturer is going to be a harder choice though. Each manufacturer has different designs for their anchor bolts and they are proprietary to each manufacturer. Checking out the manufacturer’s website will give you a good idea of who they are and what they offer. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Talking to someone who is well versed in anchor bolts about what they do and how they affect our everyday life would astound most people. Although one would think that anchor bolts are not the most interesting thing to talk about, after seeing what they are used for and how they help keep our structures together and keep us safe, you might change your mind. Most people are not educated on what anchor bolts are
used for and they have no idea what common structures house anchor bolts. The answer is almost everything. Anchor bolts are used in your homes and in skyscrapers, in boats and in radio towers, even in the highway and highway signs.
Anchor bolts are used to obviously anchor one surface to another. There really isn’t all that much more to it, but because of its simplicity therein lies the beauty. Anchor bolts are irreplaceable and are always needed in many different projects. With this material needed in many different projects the manufacturing of anchor bolts will most likely only grow as time goes on.
Anchor bolt manufacturers have worked hard to make sure that they are providing top quality products and that their designs for anchor bolts work well and are tested thoroughly. This is why each manufacturer differs in their products, the design, and why you should, as a consumer, make sure that you are satisfied with their products before deciding to use them as your sole provider for anchor bolts. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Contractors are always looking to find a good manufacturer for their materials. Researching different anchor bolt manufacturers in Florida is not something that a lot of contractors have time for although it is important if they are going to be building different structures where it is important that it stay together. Anchor bolts come in all different shapes and sizes so it is really dependant on the projects that you will be handling for what manufacturer you’ll be looking for. Depending on the manufacturer they may specialize in certain size anchor bolts or certain designs/uses.
With all the different manufacturers out there it should be very easy for you to find a suitable anchor bolt manufacturer in Florida that you can use for all of your needs. Since most anchor bolt manufacturers provide their products across the nation, it is not as important that your anchor bolt manufacturer come from the same state as your business is in. It makes it easier for someone to be in contact or actually go the manufacturer’s office if you need to get in touch with them either way.
Anchor bolt manufacturers in Florida are a dime a dozen, and most actually make other construction materials too. So if you are thinking about finding a direct manufacturer to supply your business with its materials then this might be a good idea for you. On the other hand, if you place importance on your anchor bolts and want them to be of top quality, going with a manufacturer that specializes in anchor bolts and construction fasteners might be the way to go. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Anchor Bolt Source - Testing
11:00 am Since there are so many different reasons that an anchor bolt could fail it is important to make sure that you are using the correct anchor bolts for the job as well as installing them correctly. The failure of anchor bolts can result in tremendous accidents and possibly even endanger people’s lives. This is the main importance of all anchor bolts, to keep large structures together. With all the safety precautions that are taken each time an anchor bolt is installed you can see why anchor bolt failures are so few and far between. Making sure that they don’t fail is one of the most important aspects of anchor bolt installation.
Not all things can be prevented by the contractor though. It is up to the manufacturer to make sure that they are selling a quality product that is reliable and can be used by a contractor without a question. The way that manufacturer makes sure that their anchor bolts are ready to use and can be used is by testing. Manufacturers test all their designs and sizes of bolts many times over to make sure that they perform in the correct way and without something going wrong.
There are many different ways to test an anchor bolt so that manufacturers know if it will hold up under the conditions it is supposed to. These tests are done on each design of anchor bolt many times over before it is deemed acceptable and they put it up for production. Without all this rigorous testing it would be much more unsafe for contractors to use anchor bolts and we would most have many more failures than we do right now. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
We’ve been talking about how anchor bolts are used in a variety of different projects but I haven’t actually gone over some specific examples. They are used in many important structures all around the world. Although they are used in many other cases than what is listed below, this is just a quick posting to show you how much anchor bolts are used. Now each time you leave the house you’ll be thinking about anchor bolts and how they are incorporated all around you.
When you are on the highway, anchor bolts are used to keep the surface you are driving on together. All of the steel beams, girders, trusses, and large road signs are supported by anchor bolts; the support is primarily for wind loads. Many bolts are placed in each of these structures to 
provide all the required support as well as to cover in case one of the anchor bolts fails. Power transmission towers are held down by large anchor bolts as well as radio tower reaction blocks. The nuclear power industry uses anchor bolts in a number of ways as well.
Rock anchors are another type of anchor bolt that is used in mining and foundations. They are used by bonding part of the anchor to rock or concrete by cement grout, resin, or fixed by a mechanical anchor. The portion that is free is grouted afterwards to protect against corrosion. This application is used in retaining walls, tunnels, mines, slope stabilization, and rock fall protection.
By showing you these few examples of what anchor bolts can/are used for you can see how versatile they really are. Used in everyday applications and for more specific tasks. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Source: CONCRETE CONSTRUCTION MAGAZINE
Publication date: November 1, 2005
Setting anchor bolts can be as easy as cutting out a plywood jig to hold the bolts and positioning the assembly just above a slab during concrete placement. More precision requires much more elaborate methods. Brian Long, a superintendent for Lindblad Construction, Joliet, Ill., specializes in highly accurate anchor bolt placements. His company’s goal is to do the job right so that remedial action isn’t needed after concrete is placed.
Long says that the length of an anchor bolt is important, too. Shorter bolts are much easier to secure than longer ones. In either case, before work starts in the field, Lindblad constructs CAD shop drawings for each of the templates needed for a project. Its steel fabricator uses the CAD files to guide the machines in the production of extremely accurate templates from ¼-inch-thick steel plate. The templates hold the anchor bolts, and usually two or three template plates hold each anchor assembly in position.
On the jobsite, concrete “mud mats” are first cast under the slab. Layout on the mud mats locates the position for the templates. Long says 
his company hires surveyors who use theodolites to locate the centerlines in both directions for the templates. With the centerlines marked on the mud mats, workers can use tape measures to mark out the template locations. After locations are marked, rigid steel frames are erected and bolted into the mud mats to hold the templates at the proper position and elevation. Depending on the size and complexity of a template, either angle-iron or universal strut is used to build the frame. The final step is checking. By setting lines at the top of a slab on the template center marks, workers can easily check to see that the positioning is right.
Even though anchor bolts are very secure when concrete is being placed, Long says the placing crew is told: “Don’t touch the anchor bolts.” There is constant monitoring during placement. Long adds that it’s helpful to have the same concrete crew for each placement. (End Article).
Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Source: CONCRETE CONSTRUCTION MAGAZINE
Publication date: November 1, 2005
Setting anchor bolts may sound like a simple task in preparing a slab or foundation for placement. But for industrial/commercial concrete contractors it can become a very complicated and important detail. Some contractors are selected specifically because they can accurately and efficiently set anchor bolts for heavy machinery and steel columns. Locating and installing anchor bolts can have a tremendous impact on the rest of the project. Here are some of the steps that professionals take.
When Lavy Concrete Construction, Piqua, Ohio, decided to purchase a robotic total station (a surveying instrument that combines the 
features of a digital theodolite and electronic distance measuring (EDM) technology) for its commercial/residential concrete foundation business, it also began working for other construction companies to lay out anchor bolts for machine pads and steel columns. Ben Lavy, the company’s layout specialist, says they start by drawing out the locations with computer assisted design (CAD) software, correcting any errors on plans, and making the inevitable changes that occur in most projects. Dimensions are included for all anchor bolt locations, which CAD automatically converts to x-y coordinates. The coordinates are loaded into the data collector of the robotic total station. Then the layout person does the layout work alone on the jobsite.
Traditionally anchor bolts are located by string line and tape measures, but Lavy says accuracy, efficiency, and consistency are greatly improved with total station technology. Human error and cumulative errors are greatly reduced compared with tape measured layouts. Lavy’s goal is accuracy within 1/8 inch of the true point on most projects, but he can get closer tolerances. (End Article)
Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Anchor bolts are known to be extremely detrimental to building structures all around the world. They are used for so many different projects that it really is almost like an everyday task for those who specialize in installing and using anchor bolts. Even though it seems like an everyday task that is mundane and, although important, very nonchalant, you would be wrong. Installing anchor bolts is a very difficult task and needs careful measurements and precision to make sure that the anchor bolt is installed and placed correctly. 
Without being placed in a specific location and under the right conditions, contractors run the risk of misplacing their anchor bolts.
The American Institute of Steel Construction (AISC) Structural Steel Educational Council, Steel TIPS (Technical Information and Product Services), Dec. 1993, states: “The installation of anchor bolts is not an easy task under the best of conditions. If the contractor has a firm, level, dry, and uncongested jobsite, then the steel erector will probably find properly installed anchor bolts. But we all know most sites are not in the above listed condition. So misplaced anchor bolts may be expected.” Source: Concrete Construction, August, 2004 by Muhammad A. Cheema.
As you can see, installing anchor bolts is a difficult task for contractors and the fact that they install anchor bolts everyday shows that they are very skilled in what they do. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Anchor Bolt Source - Manufacturer Differences
March 3, 2008 2:15 pmAnchor bolts are made by many different manufacturers all around the United States. There are differences between each of these manufacturers, although subtle differences, they still make an impact. Construction companies are always making sure their materials are of top quality and those that buy directly from the manufacturer have a few things to compare. One of the differences between each and every manufacturer is the design of their anchor bolts. Each manufacturer has different designs that are proprietary to that specific anchor bolt manufacturer.
This means that wherever you go that each manufacturer’s anchor bolts will have the same basic ideas behind the actual anchor bolt but 
the way it looks and will be different. The anchor bolt is going to be functioning in the same way just look different from manufacturer to manufacturer. Checking out each manufacturer’s products is going to benefit you in picking the best quality of anchor bolts that is out there. As a construction company you are going to want to make sure that the anchor bolts you use are going to hold up for all the projects that you are going to use them for. Especially to make sure that they are a quality material and design, since your structures could be dangerous if they were unstable.
Choosing an anchor bolt manufacturer is going to differ in between each in the amount of anchor bolts that they produce. You don’t want to choose an anchor bolt manufacturer that can’t provide you with the amount of anchor bolts that you need. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
Anchor bolts are used in many different structures and buildings. Most people have no idea what goes into building a structure so that it continues to stand day after day without crumbling or falling apart. These people trust those who have built the structure, they also trust the materials that the building is made out of. This comes down to a lot of different materials but anchor bolts being a big part of keeping the structure together in general. Anchor bolts do so much for a structure and if we didn’t have them to secure everything it would be a hundred times harder to build certain structures.
Seeing as how anchor bolts are used for a lot of things there is a good reason why quality anchor bolts are necessary. Making sure that you have a quality manufacturer of anchor bolts is imperative to a lot of people. Construction companies and builders that use your anchor bolts are depending on the manufacturer to make a product that won’t fail them during and after construction. There are always going to be exceptions, one bad anchor bolt gets through and something bad happens. This is rare and if the anchor bolt company is responsible and a good manufacturer then you can trust their products.
Anchor bolt manufacturers are scattered all over the United States and you can most likely find one in your state. Anchor bolt manufacturers differ from each other in a couple different ways. The differences between them will be discussed in a later post. Anchor Bolt Source provides high-quality, nonstandard anchor bolts and construction fasteners. For more information please visit the Anchor Bolt Source website.
